View MKP385_7670109.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.vishay.com for technical questions contact: filmcaps.r oeselare@vishay.com document number: 28152 1 revision: 17-feb-06 mkp 385 vishay bccomponents metallized polypropylene film ac and pulse capacitors mkp radial potted type applications where steep pulses occur e.g. smps (switch mode power supplies). electronic lighting e.g. ballast. motor control circuits. marking c-value; tolerance; rated voltage; code for dielectric material; code for factory of origin; manufacturer's type designation; manufacturer; year and week of manufacture dielectric polypropylene film electrodes metallized film encapsulation flame retardant plastic case and epoxy resin (ul-class 94 v-0) construction internal serial construction leads tinned wire capacitance range (e24 series) 0.001 to 0.033 f capacitance tolerance 5 % rated (dc) voltage 1600 v; 2000 v features 7.5 mm bent back pitch, 10 and 15 mm lead pitch. low contact resistance. low loss dielectric. small dimensions for high density packaging. supplied loose in box and taped on reel. rohs compliant product. rated (ac) voltage 550 v; 700 v rated peak-to-peak voltage 1600 v; 2000 v climatic category 55/110/56 rated temperature (dc) 85 c rated temperature (ac) 85 c maximum application temperature 110 c maximum operating temperature for limited time 125 c reference specifications iec 60384-17 performance grade grade 1 (long life) stability grade grade 2 detail inspection and test requirements see technical product documentation sheet 191 detail specification for more detailed data and te st requirements contact: filmcaps.roeselare@vishay.com l h l t p ? d t w l h h ' h f ' f (1) 15 10 ? d t w dimensions in mm (1) |f-f?| < 0.3 mm f = 7.5 + 0.6/- 0.1 mm rohs compliant p b -free e3
document number: 28152 for technical questi ons contact: filmcaps .roeselare@vishay.com www.vishay.com revision: 17-feb-06 2 mkp 385 metallized poly propylene film ac and pulse capacitors mkp radial potted type vishay bccomponents composition of catalog number specific reference data description value tangent of loss angle: at 10 khz at 100 khz 5 10 ? 4 15 10 ? 4 rated voltage pulse slope (du/dt) r p = 10 mm and 10 mm bent back to 7.5 mm p = 15 mm and 15 mm bent back to 7.5 mm > 4000 v/s > 2000 v/s r between leads, for c 1 f at 500 v; 1 minute > 100000 m r between leads and case; 500 v; 1 minute > 30000 m at 1600 vdc at 2000 vdc ionization (ac) voltage (typical value) at 20 pc peak discharge > 600 v > 750 v withstanding (dc) voltage (cut off current 10 ma); rise time 100 v/s 2560 v; 1 minute 3200 v; 1 minute withstanding (dc) voltage between leads and case 2840 v; 1 minute 2840 v; 1 minute * use this partnumber for t hose with access to the vishay?s sap system and partners website within the americas 2222 385 xx xx x bfc2* 385 xx xx x type and pitches 385 10.0/7.5 mm 15.0/7.5 mm 10.0 mm 15.0 mm type packaging lead configuration preferred types c-tol 1600 v 2000 v 385 loose in box lead length 3.5 + 1/- 0.5 mm or 3.5 0.3 mm 5 % 50 60 taped on reel h = 18.5 mm; p 0 = 12.7 mm reel diameter = 500 mm 5 % 52 62 taped on reel (bent back to 7.5 mm) h = 16.0 mm; p 0 = 15.0 mm reel diameter = 500 mm 5 % 53 63 ammopack h = 18.5 mm; p 0 = 12.7 mm 5 % 56 66 ammopack (bent back to 7.5 mm) h = 16.0 mm; p 0 = 15.0 mm 5 % 58 68 on request 385 loose in box lead length 5.0 1.0 mm 5 % 51 61 loose in box lead length 25.0 2.0 mm 5 % 54 64 taped on reel (bent back to 7.5 mm) h = 16.0 mm; p 0 = 15.0 mm reel diameter = 356 mm 5 % 55 65 loose in box lead length 3.2 + 0.3/- 0.6 mm 5 % 57 67 multiplier (nf) 0.1 2 1 3 10 4 100 5 capacitance (numerically) example: 104 = 10 x 10 = 100 nf
www.vishay.com for technical questions contact: filmcaps.r oeselare@vishay.com document number: 28152 3 revision: 17-feb-06 mkp 385 vishay bccomponents metallized polypropylene film ac and pulse capacitors mkp radial potted type u rdc = 1600 v; u rac = 550 v; u p-p =1600v note 1. l t = 3.5 0.3 mm for pitch = 15 mm * net weight for short lead component c (f) dimensions w h (h?) l (mm) mass (g)* catalog number 2222 385 ..... and packaging c-tol = 5 % loose in box reel ammopack i t = 3.5 + 1/- 0.5 mm (1) short leads long leads original pitch pitch = 7.5 mm (bent back) original pitch bent back ? 500 mm ? 365 mm last 5 digits spq spq spq spq spq spq spq pitch = 10 0.4 mm; d t = 0.60 0.06 mm pitch = 10.0 mm pitch = 7.5 mm (bent back) pitch = 10.0 mm pitch = 7.5 mm 0.002 4.0 10.0 (12.0) 12.5 0.66 50202 1000 1250 1400 2000 950 1300 0.0022 50222 0.0024 50242 0.0027 50272 0.003 50302 0.0033 5.0 11.0 (13.0) 12.5 0.90 50332 1000 1000 1100 1900 750 1000 0.0036 50362 0.0039 50392 0.0043 50432 0.0047 6.0 12.0 (14.0) 12.5 1.1 50472 750 750 900 1500 600 850 0.0051 50512 0.0056 50562 0.0062 50622 0.0068 50682 pitch = 15 0.4 mm; d t = 0.60 0.06 mm pitch = 15.0 mm pitch = 7.5 mm (bent back) 0.0075 5.0 11.0 (13.0) 17.5 1.1 50752 1250 1000 1100 950 550 0.0082 50822 0.0091 6.0 12.0 (14.0) 17.5 1.4 50912 1000 1000 900 800 450 0.010 50103 0.011 50113 0.012 50123 pitch = 15 0.4 mm; d t = 0.80 0.08 mm pitch = 15.0 mm pitch = 7.5 mm (bent back) 0.013 7.0 13.5 (15.5) 17.5 2.0 50133 1000 500 800 700 400 0.015 50153 0.016 50163 0.018 8.5 15.0 (17.0) 17.5 2.5 50183 1000 500 650 550 300 0.020 50203 0.022 50223 0.024 50243 0.027 10.0 16.5 (18.5) 17.5 3.3 50273 500 500 600 500 250 0.030 50303 0.033 50333
document number: 28152 for technical questi ons contact: filmcaps .roeselare@vishay.com www.vishay.com revision: 17-feb-06 4 mkp 385 metallized poly propylene film ac and pulse capacitors mkp radial potted type vishay bccomponents u rdc = 2000 v; u rac = 700 v; u p-p = 2000 v note 1. l t = 3.5 0.3 mm for pitch = 15 mm * net weight for short lead component c (f) dimensions w h (h?) l (mm) mass (g)* catalog number 2222 385 ..... and packaging c-tol = 5 % loose in box reel ammopack i t = 3.5 + 1/- 0.5 mm (1) short leads long leads original pitch pitch = 7.5 mm (bent back) original pitch bent back ? 500 mm ? 365 mm last 5 digits spq spq spq spq spq spq spq pitch = 10 0.4 mm; d t = 0.60 0.06 mm pitch = 10.0 mm pitch = 7.5 mm (bent back) pitch = 10.0 mm pitch = 7.5 mm 0.001 4.0 10.0 (12.0) 12.5 0.66 60102 1000 1250 1400 2000 950 1300 0.0011 60112 0.0012 60122 0.0013 60132 0.0015 60152 0.0016 60162 0.0018 5.0 11.0 (13.0) 12.5 0.90 60182 1000 1000 1100 1900 750 1000 0.002 60202 0.0022 60222 0.0024 60242 0.0027 6.0 12.0 (14.0) 12.5 1.1 60272 750 750 900 1500 600 850 0.003 60302 0.0033 60332 0.0036 60362 pitch = 15 0.4 mm; d t = 0.60 0.06 mm pitch = 15.0 mm pitch = 7.5 mm (bent back) 0.0039 5.0 11.0 (13.0) 17.5 1.1 60392 1250 1000 1100 950 550 0.0043 60432 0.0047 60472 0.0051 6.0 12.0 (14.0) 17.5 1.4 60512 1000 1000 900 800 450 0.0056 60562 0.0062 60622 0.0068 60682 pitch = 15 0.4 mm; d t = 0.80 0.08 mm pitch = 15.0 mm pitch = 7.5 mm (bent back) 0.0075 7.0 13.5 (15.5) 17.5 2.0 60752 1000 500 800 700 400 0.0082 60822 0.0091 60912 0.010 60103 0.011 8.5 15.0 (17.0) 17.5 2.5 60113 1000 500 650 550 300 0.012 60123 0.013 60133 0.015 10.0 16.5 (18.5) 17.5 3.3 60153 500 500 600 500 250 0.016 60163 0.018 60183 0.020 60203
www.vishay.com for technical questions contact: filmcaps.r oeselare@vishay.com document number: 28152 5 revision: 17-feb-06 mkp 385 vishay bccomponents metallized polypropylene film ac and pulse capacitors mkp radial potted type mounting normal use the capacitors are designed for mounting on printed-circuit boards. the capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. for detailed tape specifications refer to type detail specification "hqn-384-01/10 2, packaging information". specific method of mounting to withstand vibration and shock in order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. the capacitors shall be mechanically fixed by the leads. space requirements on printed-circuit board the maximum length and width of film capacitors is shown in the figure: ? eccentricity as in figure. the maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. ? product height with seating plane as given by "iec 60717" as reference: hmax h + 0.3 mm. characteristics capacitance (1 khz) storage temperature ? storage temperature: t stg = - 25 to + 40 c with rh maximum 80 % without condensation ratings and characteristics reference conditions unless otherwise specified, all electrical values apply to an ambient free temperature of 23 1 c, an atmospheric pressure of 86 to 106 kpa and a relative humidity of 50 2 %. for reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperatur e and a relative humidity not exceeding 20 %. impedance - 60 - 20 0 20 50 100 130 t am b (c) - 8 - 6 - 4 - 2 0 2 4 c/c ( % ) eccentricity i max = i + 0.3 mm b max = b + 0.3 mm 10 4 10 5 10 6 10 7 10 8 f (hz) 10 2 impedance ( ) 10 1 10 0 10 -1 10 -2 10 -3 10 nf 1.0 nf
document number: 28152 for technical questi ons contact: filmcaps .roeselare@vishay.com www.vishay.com revision: 17-feb-06 6 mkp 385 metallized polypropylene film ac and pulse capacitors mkp radial potted type vishay bccomponents max dc and ac voltage as function of temperature max rms voltage as a function of frequency max rms voltage as a function of frequency - 60 - 20 20 60 100 t am b (c) factor 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 10 4 10 5 10 6 10 7 10 8 f (hz) 10 3 ac v oltage ( v ) 10 2 10 1 2.2 nf 10 3 ta m b 8 5 c, 1600 v dc 4.7 nf 10 nf 22 nf 33 nf 10 4 10 5 10 6 10 7 10 8 f (hz) 10 3 ac v oltage ( v ) 10 2 10 1 10 3 ta m b 8 5 c, 2000 v dc 2. 2 nf 4.7 nf 10 nf 20 nf 1.0 nf 2.2 nf 4.7 nf 10 nf 22 nf 33 nf 10 3 10 4 10 5 10 6 10 7 f (hz) 10 3 ac v oltage ( v ) 10 2 10 1 10 2 ta m b 110 c, 1600 v dc 10 3 10 4 10 5 10 6 10 7 f (hz) 10 3 ac v oltage ( v ) 10 2 10 1 10 2 ta m b 110 c, 2000 v dc 1.0 nf 2. 2 nf 4. 7 nf 10 nf 20 nf
www.vishay.com for technical questions contact: filmcaps.r oeselare@vishay.com document number: 28152 7 revision: 17-feb-06 mkp 385 vishay bccomponents metallized polypropylene film ac and pulse capacitors mkp radial potted type insulation resistance maximum allowed component temperature rise ( t) as a function of the ambient temperature (t amb ) tanget of loss angle heat conductivity (g) as a funct ion of original pitch and capacitor body thickness in mw/c 30 60 90 120 t am b (c) 10 6 rc (s) 10 5 10 4 0 30 60 90 130 t am b (c) 12 t (c) 8 0 0 4 10 3 10 4 10 5 10 6 f (hz) 10 3 10 2 10 0 10 2 10 1 1 10 2 2 3 1600 v: c 0.0068 f : curve 2 c 0.033 f : curve 3 2000 v: c 0.0036 f : curve 1 c 0.020 f : curve 2 w max (mm) heat conductivity (mw/c) pitch 10 mm pitch 15 mm 4.0 6.5 - 5.0 7.5 10 6.0 9.0 11 7.0 - 12 8.5 - 16 10.0 - 18
document number: 28152 for technical questi ons contact: filmcaps .roeselare@vishay.com www.vishay.com revision: 17-feb-06 8 mkp 385 metallized polypropylene film ac and pulse capacitors mkp radial potted type vishay bccomponents power dissipation and maximum component temperature rise the power dissipation must be limited in order not to exceed the maximum allowed component tem perature rise as a function of the free air ambient temperature. the power dissipation can be calculated according type detail specification "hqn-384-01/101: technical information film capacitors" with the typical tgd of the curves. the component temperature rise ( t) can be measured (see section "measuring the component temperature" for more details) or calculated by t = p/g: ? t = component temperature rise (c) ? p = power dissipation of the component (mw) ? g = heat conductivity of the component (mw/c) measuring the component temperature a thermocouple must be attached to the capacitor body as in: the temperature is m easured in unloaded (t amb ) and maximum loaded condition (t c ). the temperature rise is given by t =t c - t amb . to avoid radiation or convection, the capacitor should be tested in a wind-free box. application note and limiting conditions these capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as descri bed hereunder. these mains applications are st rictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. to select the capacitor for a certain application, the following conditions must be checked: 1. the peak voltage (u p ) shall not be greater than the rated dc voltage (u rdc ) 2. the peak-to-peak voltage (u p-p ) shall not be greater than the maximum (u p-p ) to avoid the ionisation inception level 3. the voltage peak slope (du/dt) shall not exceed the rated vo ltage pulse slope in an rc-circuit at rated voltage and without ringing. if the pulse voltage is lower than the rated dc voltage, the rated voltage pulse slope may be multiplied by u rdc and divided by the applied voltage. for all other pulses following equation must be fulfilled: t is the pulse duration 4. the maximum component surface temperature rise must be lower th an the limits (see figure max allowed component temp rise) 5. since in circuits used at voltages over 280 v peak-to-peak the risk for an intrinsically active flammability after a capacito r breakdown (short circuit) increases, it is recommended that the power to the comp onent is limited to 100 times the values mentioned in the table: "heat conductivity" 6. when using these capacitors as across-the-line capacitor in t he input filter for mains applicatio ns or as series connected wi th an impedance to the mains the applicant mu st guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). thermocouple 2 ?? du ? 2 ?? dt ? dt < u rdc t 0 ? du ? ? dt ? rate d
www.vishay.com for technical questions contact: filmcaps.r oeselare@vishay.com document number: 28152 9 revision: 17-feb-06 mkp 385 vishay bccomponents metallized polypropylene film ac and pulse capacitors mkp radial potted type voltage conditions for 6 above example c = 4n7 1600 v used for the voltage signal shown in next figure. u p-p = 1000 v; u p = 900 v; t1 = 12 s; t2 = 64 s; t3 = 4 s the ambient temperature is 80 c. in case of failure, the oscillation is blocked. checking the conditions: 1. the peak voltage u p = 900 v is lower than 1600 v (dc) 2. the peak-to-peak voltage 1000 v is lower than 2 2 x 550 v (ac) = 1600 u p-p 3. the voltage pulse slope du/dt = 1000 v/4s = 250 v/s. this is lo wer than 4000 v/s (see specific reference data for each vers ion) 4. the dissipated power is 35 mw as calculated with fourier terms and typical tgd. the temperature rise for w max = 6.0 and pitch = 10 mm will be 35 mw / 9 mw/c = 3.9 c this is lower than 10 c temperature rise at 80 c, acc figure. 5. oscillation is blocked 6. not applicable voltage signal: allowed voltages t amb 85 c 85 c < t amb 110 c 110 c < t amb 125 c maximum continuous rms voltage u rac u rac u rac maximum temporary rms-overvoltage (< 24 hours) 1.25 x u rac 0.875 x u rac 0.625 x u rac maximum peak voltage (v o-p ) (< 2 s) 1.6 x u rdc 1.1 x u rdc 0.8 x u rdc v oltage u p t 3 t 1 t 2 u p-p time
document number: 28152 for technical questi ons contact: filmcaps .roeselare@vishay.com www.vishay.com revision: 17-feb-06 10 mkp 385 metallized polypropylene film ac and pulse capacitors mkp radial potted type vishay bccomponents quick reference test requirements test procedure (quick reference) requirements robustness of leads tensile strength: ?iec 60068-2-21? load 10 n; 10 s no visible change ligible marking | c/c| 1 % tan 5 x 10 -4 bending: ?iec 60068-2-21? load 5 n; 4 x 90 resistance to soldering heat: ?iec 60068-2-20? solder bath: 260 c; 10 s component solvent resistance isopropyl alcohol; 23 c; 5 minutes robustness of component vibration: ?iec 60068-2-6? 10 to 55 hz; amplitude 0.75 mm or acceleration 98 m/s 2 ; 6 hours | c/c| 1 % tan 5 x 10 -4 shock: ?iec 60068-2-27? half sinewave; 490 m/s 2 ; 11 ms climatic sequence dry heat: ?iec 60068-2-2? 16 hours; 110 c | c/c| 2 % tan 5 x 10 -4 r ins 50 % of specified value damp heat, cyclic,test db, first cycle, ?iec 60068-2-30? cold: ?iec 60068-2-1? 2 hours; - 55 c damp heat, cyclic,test db; remaining cycles: ?iec 60068-2-30? other applicable tests damp heat, steady state: ?iec 60068-2-3? 56 days; 40 c; 90 to 95 % rh | c/c| 2 % tan 5 x 10 -4 r ins 50 % of specified value endurance (ac): ?iec 60384-17? 2000 hours: 1.25 x u rac ; (rms); 50 hz; 85 c 0.875 x u rac ; (rms); 50 hz; 110 c | c/c| 5 % tan 5 x 10 -4 r ins 50 % of specified value endurance (ac): 500 hours : 0.625 x u rac ; (rms); 50 hz; 125 c | c/c| 10 % + 100 pf tan 5 x 10 -4 r ins 50 % of specified value heat storage: ?iec 60384-17? 2000 hours; 110 c | c/c| 3 % tan 5 x 10 -4 resistance to soldering heat with preheating: ?iec 60384-17? body temperature: 105 c bath temperature: 260c; dwell time 10 s | c/c| 3 % tan 5 x 10 -4 passive flammability: ?iec 60384-1? class b no burning endurance (dc) ?iec 60384-17? 2000 hours: 1.25 x u rdc ; 85 c 0.875 x u rdc ; 110 c | c/c| 3 % tan 5 x 10 -4 r ins 50 % of specified value endurance (dc) 500 hours: 0.625 x u rdc ; 125 c | c/c| 6 % tan 5 x 10 -4 r ins 50 % of specified value ignition of lamp application test: 1600 v types: 2000 v types: 60 khz 85 c 10000 cycles : 1 s on 29 s off 2800 v pp 3000 v pp | c/c| 5 % tan 5 x 10 -4 r ins 50 % of specified value
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of MKP385

	To Download MKP385 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .